Specifications:
Voltage: DC 5V-16V
Continuous current: 10A
Short-term maximum current: 20A (less than 10 seconds)
Speed control mode: PWM stepless speed control can be used to adjust the light.
Control mode: Potentiometer speed control (clockwise click to open, continue to rotate clockwise from 1% to 99% speed).
Duty cycle: 0%-99% (0% position is the switch off state when the potentiometer is at its farthest left)
When the current is 0.002A (no need to turn off the governor for a long time, there will be no current)
Efficiency: Highest efficiency up to 98%.
Size: Length 3cm (excluding potentiometer), width 2cm, height 1.4cm.
Please note that governors are mostly used to control motor speed. If you are familiar with dimming LEDs, make sure the LEDs can also be operated directly on the power supply. The dimming range of a speed controller is from LED to LED. If the LED is connected directly to the power supply, it will be completely off during dimming. If the LED is connected directly to a resistor in series,
Note: The module needs to be connected to the load, and the potentiometer output voltage will be adjusted to change, the multimeter measurement output will not change if the module is not connected to the load.
Volume: Length 3cm (without potentiometer), width 2cm, height 1.4cm
Weight: 10 grams