หากต้องการใบเสนอราคา / ใบแจ้งหนี้ 
ติดต่อได้ทาง LINE Official: @mikroelec
  • จำนวนและราคาสินค้าที่มีอยู่จริงจะตรงกับในเว็บ
  • ถ้ากดใส่ตระกร้าได้แสดงว่ามีสินค้าพร้อมส่ง หากจำนวนไม่พอจะมีข้อความแจ้งจำนวนคงเหลือให้ทราบ
  • การรับ/ส่งสินค้ามี 3 รูปแบบคือ ส่งพัสดุ / มารับเองที่ร้าน / บริการแอปขนส่งเช่น Grab, LALAMOVE, ฺBolt, อื่นๆ



8 Channel Way AC 220V Optocoupler Isolation Module Voltage Detect Testing Board 3-5V For PLC Microcontroller TTL Level 1-Bit for Arduino

8 Channel Way AC 220V Optocoupler Isolation Module Voltage Detect Testing Board 3-5V For PLC Microcontroller TTL Level 1-Bit for Arduino
8 Channel Way AC 220V Optocoupler Isolation Module Voltage Detect Testing Board 3-5V For PLC Microcontroller TTL Level 1-Bit for Arduino8 Channel Way AC 220V Optocoupler Isolation Module Voltage Detect Testing Board 3-5V For PLC Microcontroller TTL Level 1-Bit for Arduino8 Channel Way AC 220V Optocoupler Isolation Module Voltage Detect Testing Board 3-5V For PLC Microcontroller TTL Level 1-Bit for Arduino
รหัสสินค้า SKU-02491
หมวดหมู่ โมดูลวัดแรงดันและกระแสไฟฟ้า
ราคา 290.00 บาท
สถานะสินค้า พร้อมส่ง
ลงสินค้า 18 พ.ย. 2566
อัพเดทล่าสุด 18 พ.ย. 2566
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
  • จำนวนและราคาสินค้าที่มีอยู่จริงจะตรงกับในเว็บ
  • ถ้ากดใส่ตระกร้าได้แสดงว่ามีสินค้าพร้อมส่ง หากจำนวนไม่พอจะมีข้อความแจ้งจำนวนคงเหลือให้ทราบ
  • การรับ/ส่งสินค้ามี 3 รูปแบบคือ ส่งพัสดุ / มารับเองที่ร้าน / บริการแอปขนส่งเช่น Grab, LALAMOVE, ฺBolt, อื่นๆ
Product introduction:
One 220V AC optocoupler module can be used to detect whether there is 220V AC, and output high and low levels stably (NPN output). When 220V input is detected, the LED light is on and the optocoupler is turned on to output low level. When there is no 220V input , The LED light is off, the optocoupler is blocked, and the output is pulled high by the resistor. Note when using: When using the module, it should be placed in a dry and ventilated environment with insulation protection, and attention to electrical safety.
 
Product parameters:
 
Function: Test whether AC 220V exists
output TTL level: MCU can be used for testing, the voltage is 3-5V
output can be connected to PLC 24V
wiring:
When connecting to PLC input, the COM terminal of PLC is connected to the 24V power supply, and the input end is connected to the board Signal output S1-S8, the optocoupler GND is connected to the negative pole of the power supply.
The blue 5.0 terminal is connected to the 220V voltage, and the yellow pin is the signal output.
When the 220V voltage is normal, the output is low level; when 220V is powered off, the output is high level.
Note:
After the module is powered on, do not touch any part of the white wire frame on the board as it is high voltage. Pay attention to electrical safety.
 
Instructions for use:
 
1. MCU connection
Function description: When the input terminal L N has power, the input LED light is on, the photocoupler is turned on, and the output is low. The microcontroller detects a low level.
When there is no power at the input terminal, the input LED light is off and the optical coupling is blocked, and the output is pulled high by the resistor. The microcontroller detects a high level.
 
2. PLC does not need external power supply
The MCU IO only needs to be grounded or connected to the power supply+
If it is a substitute button, the positive and negative poles of the two pins of the button must be distinguished, and the positive pole OUT and the negative pole must be connected to GND
 
Note:
The components in the white wire frame of the L and N input terminals are high-voltage electricity. When the module is powered on, do not touch any components in the white wire frame on the board because it is high-voltage, pay attention to the safety of electricity!


Package Included:
 
 
 1 x 8-Bit AC 220V Optocoupler Isolation Module

วิธีการชำระเงิน

บมจ. ธนาคารกสิกรไทย สาขาโรบินสัน ศรีสมาน ออมทรัพย์
พร้อมเพย์ สาขา- mobile
Scan this!
ไมโครอิเล็กทรอนิกส์
098-xxxxxx-9
Accept All Banks | รับเงินได้จากทุกธนาคาร

นโยบายการเปลี่ยนหรือคืนสินค้า

หากสินค้าชำรุดหรือใช้งานไม่ได้ สามารถขอเปลี่ยนสินค้าได้ภายใน 7 วัน

หมายเหตุ
ต้องไม่เสียหายอันเกิดจากใช้งานผิดพลาด ใช้ผิดวิธี ต่อไฟผิดขั้ว จ่ายไฟเกินกำหนด หรืออื่นๆที่ตรวจสอบแล้วไม่ได้เกิดจากความผิดพลาดจากการผลิตสินค้า


ค้นหาเลขพัสดุ/Track

  • ค้นหา
*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

Categories

เซนเซอร์(Senser)/ โมดูล(Module) [496]
อุปกรณ์ / อะไหล่อิเล็กทรอนิกส์ (Electronic component) [487]

Statistic

หน้าที่เข้าชม554,627 ครั้ง
ผู้ชมทั้งหมด312,270 ครั้ง
ร้านค้าอัพเดท6 ก.ย. 2568

Member

รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านMikroElectronic
MikroElectronic
จำหน่ายอุปกรณ์อิเล็กทรอนิกส์ โมดูล เครื่องมือ และอุปกรณ์ต่างๆ arduino อาดูโน อะไหล่เครื่องใช้ไฟฟ้า อะไหล่อิเล็กทรอนิกส์ รับออกแบบวงจร เขียนโปรแกรมด้วยอาดูโน รับทำโครงงาน นักเรียนนักศึกษา ให้คำปรึกษาแก้ปัญหาโครงงาน ออกแบบและสร้างงานต้นแบบ ร้านตั้งอยู่ ซอยร่วมสุข ปทุมธานี สถานที่ใกล้เคียง ดอนเมือง สรงประภา ศรีสมาน นนทบุรี แจ้งวัฒนะ
เบอร์โทร : 0984829329
อีเมล : mikroelec@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม