หากต้องการใบเสนอราคา / ใบแจ้งหนี้ 
ติดต่อได้ทาง LINE Official: @mikroelec
  • จำนวนและราคาสินค้าที่มีอยู่จริงจะตรงกับในเว็บ
  • ถ้ากดใส่ตระกร้าได้แสดงว่ามีสินค้าพร้อมส่ง หากจำนวนไม่พอจะมีข้อความแจ้งจำนวนคงเหลือให้ทราบ
  • การรับ/ส่งสินค้ามี 3 รูปแบบคือ ส่งพัสดุ / มารับเองที่ร้าน / บริการแอปขนส่งเช่น Grab, LALAMOVE, ฺBolt, อื่นๆ



DC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/Converter

DC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/Converter
DC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/ConverterDC-DC Step Up 5V 3A 15W Type-C 18650 Lithium Battery Charger Module Booster Fast Charge UPS Power Supply/Converter
รหัสสินค้า SKU-02385
หมวดหมู่ แบตเตอรี่ / Li-ion / รางถ่าน / ขั้วถ่าน / โมดูลชาร์จแบต
ราคา 170.00 บาท
สถานะสินค้า พร้อมส่ง
ลงสินค้า 23 ก.ค. 2566
อัพเดทล่าสุด 5 พ.ย. 2567
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
  • จำนวนและราคาสินค้าที่มีอยู่จริงจะตรงกับในเว็บ
  • ถ้ากดใส่ตระกร้าได้แสดงว่ามีสินค้าพร้อมส่ง หากจำนวนไม่พอจะมีข้อความแจ้งจำนวนคงเหลือให้ทราบ
  • การรับ/ส่งสินค้ามี 3 รูปแบบคือ ส่งพัสดุ / มารับเองที่ร้าน / บริการแอปขนส่งเช่น Grab, LALAMOVE, ฺBolt, อื่นๆ
Features:
1. The product is suitable for the use of power failure equipment without power failure. When the power is on, it uses an external power supply, automatically and seamlessly to power the battery when power failure occurs. 2. Type-C power supply interface
. Compared to microUSB, the current can be much larger and the maximum can be 5A.
3. Suitable for routers, cameras, boards and other equipment switching power supply when the battery is off, and remains connected to the Internet when it is off.
4. Seamless switching between external power supply and battery dual power supply (delay) continuous power supply, self-starting when power failure, self-charging when in-line power
. optional,
6. lithium battery, rechargeable lithium battery, boost output, UPS switching four practical functions.
7. Two-color LED charging status indicator, green when fully charged, and charging will stop automatically.
 
 
Parameters:
Output Voltage: 5V
Current: 3A (MAX)
Interface: Type-C interface
Peak power: 20W Rated
power: 15W
Module size: 88*41*22mm length width height. (Patch on the back of the box)
 
 
Description:
1. UPS function: When the power supply has power, the power supply directly supplies power to the load through the boost circuit, and at the same time charges the lithium battery. When the power supply is cut off, the battery path is automatically activated to supply power to the load through the boost circuit.
2. Boost circuit: peak power 20W, power 15W, BOOST boost circuit, built-in 12A high power MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V. (It is recommended to load <15W. Output 5V: Current 3A Output 9V: Current 1.6A Output 12V: Current 1.2A)
3. Lithium battery protection: overcharge, overdischarge, overtemperature, and overcurrent protection (if it enters the protection state and does not output after short by misoperation, it will automatically activate and resume output when connected to 5V) Instructions for use: 1. Standard USB port 5V+5V- has an external power supply port, and you can choose
 
 
2
. Mark USP+ and UPS- as output ports. Connect the 18650 lithium battery box back welding. It can be connected to other 3.7V baterai litium.
2. When it is a UPS, the battery needs to be installed to ensure that the input 5V has sufficient power, the output remains in real time, and the battery is powered at any time when the power is off. 3. If the UPS needs to save power consumption, after all the tests are completed solder the output indicator light, can reduce the current consumption of more than 10 Ma without affecting the normal output circuit, which is energy-saving
.
4. During the use process, the board may be triggered to enter the protection state without output due to various reasons (mistouch, wrong connection, etc.). After troubleshooting, you can connect the charging port of the board to 5V. and the board will open again. Re-output can be activated.
5.5V power supply is used, each user uses a large capacity output capacitor inside. This capacitor can continue to discharge after the power is turned off, so that the power supply has a slow down process, which will cause the board to be damaged after the power is turned off. There is no rapid replacement of the battery power. If you encounter such a situation, you can connect the discharge resistor about 1K to 5V port. 6. If you want to increase the battery capacity of the UPS module, you can use several parallel connections, and other functions will not be affected
.
 
 
Precautions:
1. There are components such as MOS on the board, which are easily damaged by induction or static electricity of the soldering iron. Please ensure that the soldering iron used is grounded (and the ground wire of the power strip is connected), and wear anti-static gloves to operate.
2. When installing the battery, be careful not to install it in reverse, otherwise it will burn the board.
3. Please select a power supply with sufficient power. To ensure the normal operation of the board.
4. The board power supply should not be higher than 5V.
5. The committee has been modified without confirmation analysis. Our store is not responsible for technical analysis and after-sales.
6. It is normal for the module to generate heat when working at high, just pay attention to the heat fan.



วิธีการชำระเงิน

บมจ. ธนาคารกสิกรไทย สาขาโรบินสัน ศรีสมาน ออมทรัพย์
พร้อมเพย์ สาขา- mobile
Scan this!
ไมโครอิเล็กทรอนิกส์
098-xxxxxx-9
Accept All Banks | รับเงินได้จากทุกธนาคาร

นโยบายการเปลี่ยนหรือคืนสินค้า

หากสินค้าชำรุดหรือใช้งานไม่ได้ สามารถขอเปลี่ยนสินค้าได้ภายใน 7 วัน

หมายเหตุ
ต้องไม่เสียหายอันเกิดจากใช้งานผิดพลาด ใช้ผิดวิธี ต่อไฟผิดขั้ว จ่ายไฟเกินกำหนด หรืออื่นๆที่ตรวจสอบแล้วไม่ได้เกิดจากความผิดพลาดจากการผลิตสินค้า


ค้นหาเลขพัสดุ/Track

  • ค้นหา
*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

Categories

เซนเซอร์(Senser)/ โมดูล(Module) [496]
อุปกรณ์ / อะไหล่อิเล็กทรอนิกส์ (Electronic component) [487]

Statistic

หน้าที่เข้าชม554,747 ครั้ง
ผู้ชมทั้งหมด312,390 ครั้ง
ร้านค้าอัพเดท7 ก.ย. 2568

Member

รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านMikroElectronic
MikroElectronic
จำหน่ายอุปกรณ์อิเล็กทรอนิกส์ โมดูล เครื่องมือ และอุปกรณ์ต่างๆ arduino อาดูโน อะไหล่เครื่องใช้ไฟฟ้า อะไหล่อิเล็กทรอนิกส์ รับออกแบบวงจร เขียนโปรแกรมด้วยอาดูโน รับทำโครงงาน นักเรียนนักศึกษา ให้คำปรึกษาแก้ปัญหาโครงงาน ออกแบบและสร้างงานต้นแบบ ร้านตั้งอยู่ ซอยร่วมสุข ปทุมธานี สถานที่ใกล้เคียง ดอนเมือง สรงประภา ศรีสมาน นนทบุรี แจ้งวัฒนะ
เบอร์โทร : 0984829329
อีเมล : mikroelec@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม