Arduino Nano 3.0 USB Type-C รุ่นใหม่ เป็น boost loader เวอร์ชั่นล่าสุด
ใช้ชิฟ CH340G แบบบัดกรีขาแล้ว
- The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- The Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Product description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
CH340 USB Driver, atmega328P main IC, bootload has been written to the board.
Specification:
CH340G replaces FT232RL
Microcontroller ATmega328P
Using the Atmel Atmega328P AU MCU, supporting ISP download, USB download and power.
Support for external 5V ~ 12V DC power supply;
Support of power supply by 9V battery.
Note:
This version is not included the USB cable.
Had the USB chip changed, the download speed and stability of WIN7 / WIN8 improved
Material: ccl
Colour blue
Operating voltage (logic level): 5V
Input voltage (recommended): 7V ~ 12V
Input voltage (limits): 6V ~ 20V
Digital I / O pins: 14 (of which 6 PWM output)
Analog input pins: 8
DC current per I / O pin: 40 mA
Flash memory: 32 KB (ATmega328) (of which 2 KB are used by the bootloader)
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)