หากต้องการใบเสนอราคา / ใบแจ้งหนี้ ติดต่อได้ทาง LINE Official: @mikroelec |
![]() |
รหัสสินค้า | SKU-00680 |
หมวดหมู่ | โมดูลวัดแรงดันและกระแสไฟฟ้า |
ราคา | 35.00 บาท |
สถานะสินค้า | พร้อมส่ง |
ลงสินค้า | 5 มิ.ย. 2563 |
อัพเดทล่าสุด | 9 เม.ย. 2566 |
จำนวน | ชิ้น |
Description
The 5A range single-phase AC current transformer module is equipped with ZMCT103C series small high-precision current transformers and sampling resistors, which is convenient for signal acquisition of AC currents within 5A.
Parameter
Current transformer: onboard precision miniature current transformer Sampling resistance: on-board sampling resistance Analog current output: can measure AC current within 5A, corresponding to analog output 5A / 5mA Output signal: the output signal is an AC voltage signal
Instructions
During the measurement, the measured signal wire passes through the circular hole of the transformer, and S and G are connected to the oscilloscope, where the amplitude of the waveform will increase with the increase of the measured current. The following figure is the waveform measured when one of the power wires of a 60W electric soldering iron passes through the circular hole of the transformer:
Features:
On-board micro precision current transfORmer
Onboard sampling strength
The module can measure AC currents less than 5A, the cORresponding analog output 5A/5mA
Rated Input Current: 5A
Rated output current: 5mA
PCB size: 18.3 x17 (mm)
Change: 1000: 1
Linear range: 0 ~ 10A (100 ohms)
Linearity: 0.2%
Precision: 0.2
Uses Insulation Voltage: 3000 V Measure
Sealing material: epoxy resin
Operating temperature: -40 °~ + 70 °
1 x 5A Range Single Phase AC Current Transformer Sensor Module for Arduino
หน้าที่เข้าชม | 554,665 ครั้ง |
ผู้ชมทั้งหมด | 312,308 ครั้ง |
ร้านค้าอัพเดท | 7 ก.ย. 2568 |