Features:
1.100% brand new and high quality. Made of high quality material, compact and easy to install.
2. Convenient to use, four spray heads, strong mist volume, continuous spray without turning on the switch.
3. Upgrade TYPE-C interface, strong universality, large mist output, stable performance, simple and easy to use.
4. High efficiency and stability, spraying when using electric power, long service life.
5. Wide range of applications: DIY do it yourself, humidify plants, use the product, the module set is ready to use, each module has a bracket and cotton swab, easy to assemble.
Parameters:
Name: Second-generation four-phase spray with colorful atmosphere
light voltage: DC5V (power supply)
Atomization frequency: 108kHz ± 2kHz
Rated current: 300MA
Material: 1.2MMFR-4
Power: 2.5-3W
Module: 57*19mm
Bottle cap holder: 25 *38mm
Bottle cap holder cotton swab: 8 * 100mm 4A bracket
: 80mm * 80mm * 130mm
4B bracket: 160nn*40mm*130mm
4A/4B cotton swab bracket 1: 7 * 121mm
Atomization parameters:
Name: Porous atomizing sheet. Silicone
sheath outer diameter: 20mm.
Drive voltage: 5V.
Rubber ring thickness: 3mm.
Resonant frequency: 108-110kHz ± 5.
Metal diameter sheet: 16mm.
Rated power: 2W.
Wire length: 250mm.
Aperture: 4-5UM.
Wire tip: PH2.0.
Number of perforations: 800.
Working mode:
1, four continuous spray modes:
1.Press the S1 switch for the first time.
2. The four nozzles are in continuous spray mode, and the two LED lights are always on.
3. Automatic power-off protection after 4 hours of spray.
2, four continuous spray modes:
press the S1 switch for the second time.
2. Shut down.
3, dynamic spray mode (press S1 to start the first time):
press the S2 switch for the first time.
2.The first press, dynamic spray.
3.2 Spray for 3 seconds at the second second of the mouth
4.3 Spray for 3 seconds from the 3rd second to the mouth
5.4 Start spraying for 3 seconds at the 4th second of the mouth.
4, indirect spray mode:
press the S2 switch for the second time.
No. 2.1 Spray, then the lights should be on.
3.Press the S2 switch for the third time.
4.1 Spray No. 2, the lights should be on.
5. Press the S2 switch for the fourth time.
6.1 # 2 # 3 # Spray, the lights should be on.
7.Press the S2 switch for the fifth time.
8.1 Spray No. 2, No. 3 and No. 4 should be on.
5: Off: Press S1
Package includes:
1X module,
4X atomizer pads,
4X cotton swabs,
4X brackets (shipped as loose parts, need to be assembled by yourself)