หากต้องการใบเสนอราคา / ใบแจ้งหนี้ ติดต่อได้ทาง LINE Official: @mikroelec |
![]() |
รหัสสินค้า | SKU-02923 |
หมวดหมู่ | LED 7 Segment |
ราคา | 95.00 บาท |
สถานะสินค้า | พร้อมส่ง |
ลงสินค้า | 13 ธ.ค. 2567 |
อัพเดทล่าสุด | 13 ธ.ค. 2567 |
จำนวน | ชิ้น |
4-digit digital tube display module LED brightness adjustable with clock point accessories building blocks
Module features are as follows:
1. Display common anode for the four red LED 0.36 inchThe module is a 12-pin 4-digit common anode digital tube (0.36 inch) display module with clock dots. The driver chip is TM1637. Only 2 signal lines are needed to enable the single-chip microcomputer to control the 4-digit 8-segment digital tube.
The module te points are as follows:
The display device is a 4-digit common anode Green-digit digital tube
Digital tube 8 levels of gray adjustable
The control interface level can be 5V or 3.3V
4 M2 screw positioning holes for easy installation
project |
Z small value |
Typical value |
Z value |
unit |
voltage |
3.3 |
5 |
5.5 |
VDC |
Current (@5V) |
— |
30 |
80 |
mA |
size |
42X24X12 |
mm |
||
weight |
8 |
g |
Control interface : a total of 4 pins (GND, VCC, DIO, CLK), GND is the ground, VCC is the power supply, DIO is the data input and output pin, and CLK is the clock signal pin;
Digital tube : 4 digits common anode 0.36 inch digital tube with score point, red letters are highlighted;
Positioning holes : 4 M2 screw positioning holes with a diameter of 2.2mm, which makes the module easy to install and position and realize the combination between modules
หน้าที่เข้าชม | 563,672 ครั้ง |
ผู้ชมทั้งหมด | 321,315 ครั้ง |
ร้านค้าอัพเดท | 19 ต.ค. 2568 |