100% brand new and high
quality Good quality desoldering Braid Unique No-Clean Flux
Pure Oxygen Free Copper Wire
Type: 75C
Width: 2mm
Color: AS Picture Show
Quantity: 1 PC
Warning
Just touch the grip and pack the desoldering wick when desoldering. Failure to do so will cause serious burns.
To avoid fire, never use iron and desoldering wick around combustibles or explosive environments.
Caution
Do not force the tip against the desoldering wick to avoid injuring yourself and/or damaging the parts and PCB.
Do not heat desoldering the wick for more than 5 seconds to avoid parts and PCB.
How to use
1. Place the desoldering wick over the solder to remove it, then push the heated soldering iron on the desoldering wick, the solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut the used part of the wick using nippers.
4. Repeat steps 1,2 and 3 if not completely taken. Absorbability May vary depending on solder. Sn63 % and 60% (tin content) is less good.