RC absorption circuit is also called RC snubber circuit, which is a circuit structure in which resistors and capacitors are connected in series and connected in parallel with switching devices. It is used to improve the voltage and current waveforms of electronic power devices when they are turned on and off.
The Elsay RC absorption circuit module can prevent the induced electromotive force generated at the moment of switching on and off of the inductive load from causing damage to the switching devices such as relays and thyristors, preventing electromagnetic interference and increasing the anti-interference ability of the microcontroller.
1. It is suitable for AC or DC 5~400V inductive load (load less than 1000W), protection relay contact or thyristor.
2. RC absorption circuit absorbs the induced electromotive force of the inductive load.
3. There is a varistor to prevent excessive voltage fluctuation and excessive current, causing the relay contacts to stick.
4. Provide the anti-interference ability of the circuit
5. Using crimp terminals to make wiring more convenient.
Board size: 34.2*14.7mm
Board function description:
Instructions for use: This module is suitable for circuits containing inductive loads and switching devices (such as relays and thyristors). When in use, the two interfaces of the module are connected to the two contacts of the relay (such as the common terminal and the normally open terminal of the relay), or It is connected in parallel with the thyristor to avoid the damage of the induced electromotive force to the relay and the thyristor.